Convert Gray Code to Hex

How to use Convert Gray Code to Hex

1. 1. Paste your Gray code values. Enter one or more reflected binary numbers into the input pane, such as a sequence you are cross-checking against a hexadecimal state table.
2. 2. Set the Separator. Enter the separator that appears between the Gray code values you pasted. The converted hexadecimal digits reuse that same separator in the output.
3. 3. Copy the hex result. Copy the resulting hexadecimal values from the output pane into firmware register notes, a debugger watch window, or a hardware specification.

When to use Convert Gray Code to Hex

Convert Gray Code to Hex takes reflected binary values and reports them directly in base 16, useful whenever the rest of your tooling or documentation prefers hex over raw bits. It skips manually converting to decimal or standard binary first.

• Matching an encoder reading to a hex register. A hardware datasheet lists valid encoder states in hexadecimal, but your sensor reports Gray code, so you need the hex equivalent to check against the spec.
• Debugging FPGA state transitions. An FPGA design uses Gray-coded state machine encoding to avoid glitches, and you want the hex form of each state for your waveform viewer's labels.
• Cross-checking a digital logic worksheet. A course exercise lists Gray code values and asks for their hexadecimal equivalents, and you want a fast way to verify your manual conversion.

Examples

1111

a

About the Convert Gray Code to Hex tool

Frequently asked questions